It is a special device that controls the power delivery of the heating element, modulating it starting at 20% of output until 100% by acting on the rotation of the knob. In order to ensure safety for people, the device has an important element, which is a useful NTC sensor that prevents the ambient temperature from exceeding 37 ° C, in compliance with European legislation. It can be assembled with different heating elements, and its parts are easily obtained from our major European manufacturers and replaced. It is possible to select three preset schedules as indicated in the guide for activating the operating times:

1. Boost2h control: 2 hours of continuous heating at 100% capacity.
2. T24h control of the boost2h, to set it to happen automatically every day at the same time (2h on, 22hoff) (typically for morning shower).
3. T12h control of the boost2h, to set it to start automatically every 12 hours (2h on, 10h off, 2h on, 10hoff (typically morning and evening shower).

Thesis Dual is a digital thermostat for the control of electric towel warmers that thanks to its two sensors is able to detect the temperature of the environment or that of the liquid inside the towel warmer. You can then use it as: a) Towel warmer thermostat: This function allows you to adjust the temperature of the towel warmer, regardless of the temperature of the room. b) Room thermostat: This function allows you to adjust the temperature of the room. The available functions are: 1. Anti-freeze: this function prevents the temperature from falling below 7°C.2. 2h timer: in this mode the heating element is activated and remains active for 2h, regardless of the ambient temperature or the internal temperature of the liquid. In order to ensure safety the external temperature cannot exceed 32 ° C and that of the liquid inside the towel warmer cannot exceed 70 ° C. At the end of 2h the thermostat returns to the mode that had been set previously. The 2h mode can be switched off at any time by pressing the ‘Mode’ button.

It is the version of DYNAMIC that controls the fluid temperature.
Dynamic Fluyd is a special version with fluid temperature sensor, it allows regulation between 30°C and 70°C.

There are 4 temperature levels:
1: (30-40°)
2: (40-50°)
3: (50-60°)
4: (60-70°)

It is possible to set the duration of the selected temperature setpoint. The default duration is 1 hour and can be increased to 2, 3, 4 hours or continuous, which runs indefinitely.
CHRONO mode offers a separate programmable time for each day of the week.
Advanced settings are available, such as key lock.

Possibility of right or left coupling of the towel warmer. It allows weekly programming with heat transfer to fluid and temperature control via the ambient sensor. It has a large display which is back lit and displays every status and mode of use that has been set. There is the possibility of rotating the entire towel warmer without removing the thermostat. It can be supplied with or without coupled resistance.

Available functions: 1. Heating device with heat transfer to fluid. 2. The ambient temperature is controlled by an external sensor. 3. The symmetry of the object allows both right and left coupling of the towel warmer. 4. The device can be controlled through the Galaxy IR remote control which is equipped with an accessory that makes it anchorable to the wall or to the towel warmer itself. 5. The “ECO” function reduces the set temperature by 3° in order to reduce energy consumption.

Smart is an electronic thermostat for controlling electric towel warmers. This thermostat has an important function, since it detects the internal temperature of the towel warmer and, using a special heating element, keeps the towel warmer at the selected temperature. Twelve different types of resistors are available, already integrated in the electronic thermostat: from 100W to 1000W.

The operating modes of the Smart are: Comfort, Boost, Stand-by/Antifreeze, Timer12, Timer24. The upper LEDs indicate the temperature and the lower ones the set mode. Furthermore, if desired, it is possible to use the towel warmer in mixed water/electric operation, thanks to the special “T” joint.

It is an electronic towel warmer thermostat which controls electric towel warmers. This thermostat detects the internal temperature of the towel warmer, then through a heating element it keeps the towel warmer at the selected temperature. Twelve different types of heating elements are available, already integrated into the electronic thermostat, with varying resitance: from 100W to 1000W.

Smart Program is an electronic programmable thermostat for electric towel warmers. Thanks to its internal sensor, it allows you to set the temperature of the towel warmer between 30 ° C and 70 ° C. Smart Program can only be controlled through its dedicated remote control, which can be hung thanks to its special support, which can be installed on the wall or directly on the towel warmer itself. Twelve different types of resistors are available: from 100W to 1000W, it can also be supplied in two colors: white or chrome. It can be installed, thanks to the special “T” joint in a towel warmer that provides the possibility of use in mixed operation.Heating device with heat transfer to fluid. 2. The temperature of the fluid is controlled by an internal sensor. 3. The symmetry of the object allows for both right and left coupling of the remote control on the towel warmer. 4. You can control the device through the Galaxy IR remote control which is equipped with an accessory that makes it anchorable to the wall or to the towel warmer.5. The “ECO” function is set at a 50° temperature for the internal liquid, to reduce energy consumption. 

It is an electronic control for electric towel warmers. Twelve different types of resistors are available: from 100W to 1000W.

1. Heating device with heat transfer from liquid.
2. The fluid temperature is kept constant and is controlled by an internal sensor.
3. The symmetry of the object allows both right and left coupling of the towel warmer.
4. You can choose between 3 different schedules  by means of the dedicated button, as indicated in the timer setting guide.
5. It is possible to activate the stand-by function by using the dedicated button and its activation is confirmed by a red LED.
6. The set program and the operating phases are visible from the indicator LED positioned at the bottom.
7. You can use the towel warmer in mixed operation thanks to the special “T” joint.

Device with ON/OFF switch for electric towel warmers with fluid heat transfer. The switch lights up when on the ON position in order to indicate the state of supply of electricity to the heating element. In order to function it requires the connection to the elctrical grid by means of a sectioning device. The symmetry of the product allows coupling of both the left and the right side of the towel warmer.

1. Heating device with heat transfer from liquid.
2. Fluid temperature kept constant at 70° thanks to an internal sensor.
3. The symmetry of the object allows both right and left coupling of the towel warmer.
4. Light switch indicates that the device is heating the fluid.
5. Nice aesthetics.
6. Available in white as well as in chrome color.

Heating element for electric towel warmers with fluid heat transfer. It provides constant temperature control via sensor that is placed inside the heating element. It must be connected to a protected mains by means of a sectioning device. The symmetry of the product allows for the coupling of the towel warmer both on the right and the left side. The display allows for the visualization of the power supply through a blue light ring with a rather pleasing esthetic effect.
1. Heating device with heat transfer from liquid.
2. Fluid temperature kept constant at 70° thanks to an internal sensor.
3. The symmetry of the object allows both right and left coupling of the towel warmer.
4. Light ring indicates whether the device is attached to a power source.
5. The towel warmer thermostat is aesthetically pleasing.
6. Available in white as well as in chrome color.