TOWEL WARMER THERMOSTATS Archivi

MUSA PRO

Written by lucrezia on 9 March 2023. Posted in TOWEL WARMER THERMOSTATS. Leave a Comment

Musa is an intelligent digital electronic device, ideal for controlling the temperature of electric towel warmers. It can be used in combination with a wide range of heating elements that can be easily connected to the device and are available from many European third-party manufacturers. The 4-button on-board keypad allows the user to access a wide variety of functions, and the large round and backlit display constantly shows all the information related to the operation of the thermostat through pleasant icons.

In addition to the functions present on the MUSA S this version is equipped with:1. You can control the device through the Galaxy IR remote control which is equipped with an accessory that makes it anchorable to the wall or to the towel warmer itself.2. Behavioral indicator. 3. The “Adaptive Starting Control – ASC” function: This function will turn on the heating element earlier than planned (up to 2 hours earlier than set start) to ensure that the room reaches the desired temperature at the set time. Note: The feature requires at least a couple of days of operation to achieve maximum efficiency.

4.Presence detection: This feature intelligently lowers the temperature to save energy without having a noticeable impact on overall comfort. If no movement is detected by the sensor, it is assumed that the space where the installed thermostat is located is not occupied by any individual and therefore does not need to be heated to normal temperature. After 60 minutes in which the room is detected free, the temperature will be lowered by 2°C. Every time someone enters the room, the sensor will detect their presence and the operation of the thermostat will return to normal.
5. It incorporates the X3D Delta Dore radio protocol and is compatible with Delta Dore TYDOM HOME and TYDOM PRO gateways to be controlled by the delta Dore TYDOM APP.

TECHNICAL SPECIFICATIONS

Technical specifications
Operational modes	Comfort, Night, Antifreeze (7°C) Stand-by, Chrono, Boost 2h, ECO, Fil-Pilote (for Class II version only), Open window detection
Conformity marking	CE
Supply voltage	230 VAC – 50 Hz
Room temperature sensor range	7°C ÷ 32°C
Appliance classes	Class I – Class II
IP code	IP44
Size	131mm x 76mm x 42mm
Available colours	White, Chrome
Optional	Wi-Fi (with Voice Assistant) or remote control “Galaxy”

GRECALE

Written by lucrezia on 7 March 2023. Posted in TOWEL WARMER THERMOSTATS. Leave a Comment

“SMART” BLOWER WITH HOT AIR FLOW, CONFORMS TO ECODESIGN STANDARD FOR ELECTRIC AND HYDRONIC TOWEL WARMERS
Controller with integrated fan, digital controls, programmable with open window detection, presence sensor, indicator and indication of energy consumption in kWh, wireless remote control
(optional).
• Compatible with the Galaxy Bluetooth remote control and with the Domus One App through the Wi-Fi connection.
• Tangential fan, which allows for both silent and vibration-free operation.
• All the functions required to make sure it complies with the Eco design standard.
• Includes connection accessories for each type of radiator.
• Available in various colors: Matt Black, Noir Sable and White.
ALL THESE FUNCTIONS ARE AVAILABLE ON THE FOLLOWING VERSIONS:
• HYDRONIC
• NON-HYDRONIC

TECHNICAL SPECIFICATIONS

Technical specifications
Operational modes	Comfort, night, antifreeze (7°C), Boost2h, Stand-By, Fil-pilote, (for Class II model only), Chrono, Key Lock, Open window detection, Fan, PIR (Presence sensor)
Conformity marking	CE
Supply voltage	230 VAC – 50 Hz
Maximum power	Adaptive ptc nominal power 500 w + 500 w, maximum resistive load: 1800 w
Selectable temperature range	7°C ÷ 32°C
Appliance classes	Class I – Class II
IP code	IP24
Size	400 mm x 270 mm x 127,8 mm
Optional	Wi-FiTM module for communicating with iOSTM/AndroidTM devices through the dedicated App, Bluetooth remote control

MUSA HOME

Written by lucrezia on 5 March 2023. Posted in TOWEL WARMER THERMOSTATS. Leave a Comment

Available functions: 1. The “Open window” function: The control is able to detect if a window has been opened by detecting a rapid drop in ambient temperature. If this happens, the radiator switches off for 30 minutes, after which the towel warmer will resume operation in the previously set state.

The “Key Lock” function: This feature allows the user to lock the keyboard to prevent accidental changes.
“Chrono” mode: This mode of operation allows the user to set a daily schedule to weekly repeat.
“Fil-Pilot” mode: This is the mode in which the towel warmer is controlled from a remote control panel. The operating mode will be selected by the Fil-Pilote control panel. The device also recognizes the most advanced six-order “Fil-Pilote” system that allows the use of the following functions:

◦ Standby: The thermostat remains on whilst the heating element is turned off.

◦ Comfort: “Comfort” temperature is maintained, as set by the user.

◦ Eco: The ambient temperature is maintained 3.5°C lower than the “Comfort” temperature.

◦ Anti-freeze: The ambient temperature is maintained at 7°C.

◦ Comfort-1: The ambient temperature is maintained 1°C lower than “Comfort” temperature.

◦ Comfort-2: The room temperature is maintained 2°C lower than “Comfort” temperature.

NOTE: By activating this mode in devices without fil-pilots the thermostat works in Comfort mode.

The “Night” function: This mode keeps the temperature close to the temperature set by the user. Use this mode to heat the room to the desired temperature. Since the temperature of the NIGHT mode is always lower than the COMFORT temperature, it is recommended to use this mode to save energy during the night or when the room remains empty for 2 hours or more.
The “2 Hour Timer” function: In this mode, maximum power is supplied to the heating element for 120 minutes regardless of the ambient temperature. After the time has elapsed, the thermostat will return to the previously set “stable” operating mode before entering 2-HOUR TIMER mode.

Note: A “stable” operating mode is a mode that has been operating for at least 5 seconds before switching to 2-hour TIMER mode.<

Anti-freeze: prevents the temperature from falling below 7°C.
Temperature offset: Since each room is different, the thermostat could potentially end up reaching a slightly different temperature than the one set, however, this can be easily solved through the use of this function.

Factory Reset: You can reset your device to factory default settings. Which resets the settings to those found when the device was first bought and taken out of its box. This procedure is recommended when you need to hand over the device to someone else. The person who receives it will have to reprogram all the settings from scratch.
Date and time adjustment.

TECHNICAL SPECIFICATIONS

SYNTHESIS WIFI

Written by lucrezia on 5 March 2023. Posted in TOWEL WARMER THERMOSTATS. Leave a Comment

In addition to the functions present on the SYNTHESIS, this version of the towel warmer thermostat features:

A programmable thermostat, which can be managed through the Wi-Fi. This function can be controlled via the Domus One App, available for any Android® or iOS® device, including weekly programming.
Compatible with Voice Assistant (Alexa and Google Home).

TECHNICAL SPECIFICATIONS

Technical specifications
Conformity marking	CE
Supply voltage	230 VAC – 50 Hz
Range of supported powers	2000 W
Selectable temperature range	7°C ÷ 32°C
Appliance classes	Class I – Class II
IP code	IP44
Size	113mm x 76mm x 42mm
Available colours	White, Chrome

ONE – RECEIVER

Written by lucrezia on 5 March 2023. Posted in TOWEL WARMER THERMOSTATS. Leave a Comment

It is an advanced electronic programmable thermostat for electric towel warmers with heat transfer to fluid and temperature control via sensor in the environment. The system consists of two units: a fixed one for resistance control, and a remote control for the control of all functions. The fixed unit can be installed on the right or left of the towel warmer and communicates bidirectionally with your remote control. It is supplied pre-assembled to the heating element itself. The remote control has a backlit display for clear viewing, it is covered with a pleasant interchangeable silicone protective cover. The latter is available in seven different colors. The device allows for the selection of a weekly programming. The remote control can be hooked in a comfortable visual area to the elements of the towel warmer by means of a magnetic support, or positioned with a special wall fixing bracket. The system can be connected to Android® and iOS® devices with a special Domus One App.

Functions: A single remote control can manage 8 different towel warmers.

Heating device with heat transfer to fluid.
2. The ambient temperature is controlled by an external sensor.
3. The symmetry of the device allows for both right and left coupling of the towel warmer.
The “ECO” function reduces the set temperature by 3° to reduce energy consumption.
The “Open window” function: The device is able to detect if a window has been opened by detecting a rapid drop in ambient temperature. If this happens, the radiator switches off for 30 minutes, after which the towel warmer will resume operation by reaching the previously set state.
The “Key Lock” function: This feature allows the user to lock the keyboard to prevent accidental changes.
The “Adaptive Starting Control – ASC” function: This function will turn on the heating element earlier than set (it can happen up to 2 hours earlier) to ensure that the room reaches the desired temperature at the set time. Note: The feature requires at least a couple of days of operation to achieve maximum efficiency. Note: The feature requires at least a couple of days of operation to reach maximum efficiency.
“Chrono” mode: This mode of operation allows the user to set a daily schedule to repeat weekly. It has many options including 6 fixed programs and 3 settable programs.
“Fil-Pilot” mode: This is the mode in which the towel warmer is controlled from a remote-control panel. The operating mode will be selected by the Fil-Pilote control panel. The appliance also recognizes the most advanced six-order “Fil-Pilote” system that allows the use of the following functions:

◦ Standby: The heating element is turned off whilst the thermostat remains on.

◦ Comfort: The “Comfort” temperature is maintained as it was set by the user.

◦ Eco: The ambient temperature is maintained at 3.5°C lower than the “Comfort” temperature.

◦ Anti-freeze: The ambient temperature is maintained at 7°C.

◦ Comfort-1: The ambient temperature is maintained at 1°C lower than the “Comfort” temperature.

◦ Comfort-2: The ambient temperature is maintained at 2°C lower than the “Comfort” temperature.

NOTE: By activating this mode in versions without fil-pilots, the thermostat works in Comfort mode.

10. The “Night” function: This mode keeps the temperature close to the temperature set by the user. Use this mode to heat the room to the desired temperature. Since the temperature of the NIGHT mode is always lower than the COMFORT temperature, it is recommended to use this mode to save energy during the night or when the room remains empty for 2 hours or more.11. The “2 Hour Timer” function: In this mode, maximum power is supplied to the heating element for 120 minutes regardless of the ambient temperature. After the time has elapsed, the thermostat will return to the previously set “stable” operating mode before entering 2-HOUR TIMER mode.
Note: A “stable” operating mode is a mode that has been operating for at least 5 seconds before switching to 2-HOUR TIMER mode

TECHNICAL SPECIFICATIONS

Technical specifications
Conformity marking	CE
Supply voltage	230 VAC – 50 Hz
Range of supported powers	100 ÷ 1000 W
Selectable temperature range	7°C ÷ 32°C ± 10%
Maximum thermal fuse temperature	152°C
Appliance classes	Class I – Class II
IP code	IP44
Size	56mm x 56mm x 44mm
Available colours	White, Chrome

DYNAMIC PRO FLUID

Written by lucrezia on 5 March 2023. Posted in TOWEL WARMER THERMOSTATS. Leave a Comment

It is the version of DYNAMIC that controls the temperature of the fluid.

TECHNICAL SPECIFICATIONS

Technical specifications
Conformity marking	CE
Supply voltage	230 VAC – 50 Hz
Supported power range	100 ÷ 1000 W
Selectable temperature range	10°C ÷ 32°C
Maximum thermal fuse temperature	152°C
Appliance classes	Class I – Class II
IP code	IP44
Size	56mm x 56mm x 44mm
Available colours	White, Chrome

DYNAMIC PRO

Written by lucrezia on 5 March 2023. Posted in TOWEL WARMER THERMOSTATS. Leave a Comment

In addition to the functions present on the DYNAMIC this version is equipped with:

1.The ability to control the device through the Galaxy IR remote control which is equipped with an accessory that makes it anchorable to the wall or to the towel warmer itself.
2. Behavioral indicator.
3. Temperature offset: Since every room is different, the thermostat may end up reaching a slightly different temperature than the one that had been set. However, this can be easily solved through the use of this function.
4. Factory Reset: You can reset your device to factory default settings. This restores the function it had when you received it. This procedure is recommended when you need to hand over the device to someone else. The person who receives it will have to reprogram all the settings from scratch.
5. It can be combined with a cable cover accessory.
NOTE: This version CANNOT be combined with a swivel resistance, as it needs to be fixed.

TECHNICAL SPECIFICATIONS

Technical specifications
Conformity marking	CE
Supply voltage	230 VAC – 50 Hz
Supported power range	100 ÷ 1000 W
Selectable temperature range	10°C ÷ 32°C
Maximum thermal fuse temperature	152°C
Appliance classes	Class I – Class II
IP code	IP44
Size	71mm x 97,5mm x 47mm
Available colours	White, Chrome (gray cable), Matte black

SMART PLUS PROGRAM

Written by lucrezia on 5 March 2023. Posted in TOWEL WARMER THERMOSTATS. Leave a Comment

This digital programmable thermostat for electric radiators has the peculiarity of being able to rotate 350° around the resistance. It is equipped with a resistance with a particular coupling produced HT SpA on which it is mechanically fixed. The radiator thermostat allows for weekly programming with heat transfer to fluid as well as temperature control via a sensor placed in the room. The large backlit display extensively displays every status and mode of use that has been set on the device. 1. Heating device with fluid heat transfer 2. The ambient temperature is controlled by an external sensor 3. The symmetry of the object allows both the right and left coupling of the towel warmer 4. You can control the device through the Galaxy IR remote control which is equipped with an accessory that makes it anchorable to the wall or to the towel warmer 5. The “ECO” function reduces the set temperature by 3° to reduce energy consumption 6. The “Open window” function: The device is able to detect if a window has been opened by detecting a rapid drop in ambient temperature. If this happens, the radiator switches off for 30 minutes, after which the towel warmer will resume operation in the previously set state.

The “Key Lock” function: This feature allows the user to lock the keyboard to prevent accidental changes.
The “Adaptive Starting Control – ASC” function: This function will turn on the heating element earlier than planned (up to 2 hours earlier than set) to ensure that the room reaches the desired temperature at the set time. Note: The feature requires at least a couple of days of operation to achieve its maximum efficiency.
“Chrono” mode: This mode of operation allows the user to set a daily schedule to weekly repeat, with 3 fixed programs and 1 programmable settable
“Fil -Pilote” mode: This is the mode in which the towel warmer is controlled by a remote-control panel. The operating mode will be selected by the Fil-Pilote control centre. The device also recognizes the most advanced six-order “Fil-Pilote” system, which allows the use of the following functions:

◦ Standby: The thermostat remains on whilst the heating element is switched off.

◦ Comfort: The “Comfort” temperature is maintained as set by the user.

◦ Eco: The ambient temperature is maintained 3.5°C lower than the “Comfort” temperature.

◦ Anti-freeze: The ambient temperature is maintained at 7°C.

◦ Comfort-1: The ambient temperature is maintained 1°C lower than the ” Comfort” temperature.

◦ Comfort-2: The ambient temperature is maintained 2°C lower than “Comfort” temperature.

NOTE: By activating this mode in devices without fil-pilots, the thermostat will work in Comfort mode.
11. The “Night” function: This mode keeps the temperature close to the temperature set by the user. Use this mode to heat the room to the desired temperature. Since the temperature of NIGHT mode is always lower than the COMFORT temperature, it is recommended to use this mode to save energy during the night or when the room is empty for 2 hours or more.

The “2 Hour Timer” function: In this mode, maximum power is supplied to the heating element for 120 minutes regardless of the ambient temperature. After the time has elapsed, the thermostat will return to the previously set “stable” operating mode before entering TIMER 2 HOURS mode.

Note: A “stable” operating mode is a mode that has been operating for at least 5 seconds before switching to TIMER mode 2 HOURS

Anti-freeze: The ambient temperature is prevented from falling below 7°C.

TECHNICAL SPECIFICATIONS

Technical specifications
Conformity marking	CE
Supply voltage	230 VAC – 50 Hz
Supported power range	100 ÷ 1000 W
Selectable temperature range	10°C ÷ 32°C
Maximum thermal fuse temperature	152°C
Appliance classes	Class I – Class II
IP code	IP44
Size	56mm x 56mm x 44mm
Available colours	White, Chrome

SMART PLUS

Written by lucrezia on 5 March 2023. Posted in TOWEL WARMER THERMOSTATS. Leave a Comment

Smart Plus is an electronic thermostat for controlling electric towel warmers.
This thermostat detects the room temperature, through a heating element it keeps the room at the set temperature. Twelve different types of resistors are available: from 100W to 1000W.
The operating modes of the Smart are: Comfort, Boost, Stand-by/Antifreeze, Timer12, Timer24 The upper LEDs indicate the set temperature and the lower one indicates the selected mode.
Furthermore, it is possible to use the towel warmer in mixed water/electric operation thanks to the special “T” joint.
The Smart Plus is available in the class II version with Fil-Pilota control.

TECHNICAL SPECIFICATIONS

Technical specifications
Conformity marking	CE
Supply voltage	230 VAC – 50 Hz
Range of supported powers	100 ÷ 1000 W
Selectable temperature range	14°C ÷ 29°C configurable
Maximum thermal fuse temperature	152°C
Appliance classes	Class I – Class II
IP code	IP44
Size	56mm x 56mm x 44mm
Available colours	White, Chrome

EVO PLUS

Written by lucrezia on 5 March 2023. Posted in TOWEL WARMER THERMOSTATS. Leave a Comment

Evo Plus (Smart Plus) is an electronic towel warmer thermostat for controlling electric towel warmers. This towel warmer thermostat detects the room temperature, then through a heating element it keeps the room at the preferred preset temperature. Twelve different types of resistors are available: from 100W to 1000W.

1.Heating device with heat transfer from liquid.
2. The ambient temperature is controlled by an external sensor.
3. The symmetry of the object allows both right and left coupling of the towel warmer.
4. You can choose between 3 different schedules by means of the dedicated button, as indicated in the timer setting guide.
5. You can turn on the stand-by (the heating element is turned off) and antifreeze functions.
6. The colored LEDs indicate the ambient temperature which can be set from 7°C (anti-frost) to 29 °C.
7. You can adjust the temperature by means the buttons on the device.
8. The “Key Lock” function: This feature allows the user to lock the keyboard in order to avoid accidental changes.
9.It is possible to use the towel warmer in mixed water/electric operation thanks to the special “T” joint.

TECHNICAL SPECIFICATIONS

Technical specifications
Conformity marking	CE
Supply voltage	230 VAC – 50 Hz
Range of supported powers	100 ÷ 1000 W
Range of configurable fluid temperature	40°C ÷ 65°C (10°C automatically selected in antifreeze mode)
Maximum thermal fuse temperature	152°C
Appliance classes	Class I – Class II
IP code	IP44
Size	56mm x 56mm x 44mm
Available colours	White, Chrome