Author: lucrezia

MUSA PRO


Musa is an intelligent digital electronic device, ideal for controlling the temperature of electric towel warmers. It can be used in combination with a wide range of heating elements that can be easily connected to the device and are available from many European third-party manufacturers. The 4-button on-board keypad allows the user to access a wide variety of functions, and the large round and backlit display constantly shows all the information related to the operation of the thermostat through pleasant icons.

In addition to the functions present on the MUSA S this version is equipped with:1. You can control the device through the Galaxy IR remote control which is equipped with an accessory that makes it anchorable to the wall or to the towel warmer itself.2. Behavioral indicator. 3. The “Adaptive Starting Control – ASC” function: This function will turn on the heating element earlier than planned (up to 2 hours earlier than set start) to ensure that the room reaches the desired temperature at the set time. Note: The feature requires at least a couple of days of operation to achieve maximum efficiency.

4.Presence detection: This feature intelligently lowers the temperature to save energy without having a noticeable impact on overall comfort. If no movement is detected by the sensor, it is assumed that the space where the installed thermostat is located is not occupied by any individual and therefore does not need to be heated to normal temperature. After 60 minutes in which the room is detected free, the temperature will be lowered by 2°C.  Every time someone enters the room, the sensor will detect their presence and the operation of the thermostat will return to normal.
5.
It incorporates the X3D Delta Dore radio protocol and is compatible with Delta Dore TYDOM HOME and TYDOM PRO gateways to be controlled by the delta Dore TYDOM APP. 

TECHNICAL SPECIFICATIONS

Technical specifications
Operational modes

Comfort, Night, Antifreeze (7°C) Stand-by, Chrono, Boost 2h, ECO, Fil-Pilote (for Class II version only), Open window detection

Conformity marking

CE

Supply voltage

230 VAC – 50 Hz

Room temperature sensor range

7°C ÷ 32°C

Appliance classes Class I – Class II
IP code IP44
Size

131mm x 76mm x 42mm

Available colours

White, Chrome

Optional

Wi-Fi (with Voice Assistant) or remote control “Galaxy”


Continue reading

GRECALE


SMART” BLOWER WITH HOT AIR FLOW, CONFORMS TO ECODESIGN STANDARD FOR ELECTRIC AND HYDRONIC TOWEL WARMERS
Controller with integrated fan, digital controls, programmable with open window detection, presence sensor, indicator and indication of energy consumption in kWh, wireless remote control
(optional).
• Compatible with the Galaxy Bluetooth remote control and with the Domus One App through the Wi-Fi connection.
• Tangential fan, which allows for both silent and vibration-free operation.
• All the functions required to make sure it complies with the Eco design standard.
• Includes connection accessories for each type of radiator.
• Available in various colors: Matt Black, Noir Sable and White.
ALL THESE FUNCTIONS ARE AVAILABLE ON THE FOLLOWING VERSIONS:
• HYDRONIC
NON-HYDRONIC

TECHNICAL SPECIFICATIONS

Technical specifications
Operational modes

Comfort, night, antifreeze (7°C), Boost2h, Stand-By, Fil-pilote, (for Class II model only),
Chrono, Key Lock, Open window detection, Fan, PIR (Presence sensor)

Conformity marking

CE

Supply voltage

230 VAC – 50 Hz

Maximum power

 Adaptive ptc nominal power 500 w + 500 w, maximum resistive load: 1800 w

Selectable temperature range

7°C ÷ 32°C

Appliance classes Class I – Class II
IP code

IP24

Size

400 mm x 270 mm x 127,8 mm

Optional

Wi-FiTM module for communicating with iOSTM/AndroidTM devices through the
dedicated App, Bluetooth remote control


Continue reading

GALAXY


Remote control with large display and modern ergonomic design, with support for vertical wall positioning, magnetic coupling. Weekly programming with three time slots. Behavioral indicator, enabling open window function and presence sensor.

Available versions:


  • IR – INFRAROSSI

    Remote for remote control equipped with double transmitter for better communication with the thermostat.

     Compatible devices:

    • SMART PROGRAM
    • SMART PLUS PROGRAM
    • MUSA PLUS S
    • DYNAMIC
    • DYNAMIC PLUS
    • SYNTHESIS
    • SYNTHESIS WI-FI
    • DYNAMIC R
    • INFINITY PLUS
    • INFINITY Wi-Fi
    • BLOWER
  • BLE – BLUETOOTH

    • ONE RECEIVER
    • THIRD-PARTY DEVICES
  • RF – RADIO FREQUENCY

    • THIRD-PARTY DEVICES

TECHNICAL SPECIFICATIONS

Technical specifications
Operational modes

Comfort, Night, Fil-Pilote, Timer2h or Boost2h, Stand-by, Clock-thermostat,
Antifreeze, ECO, Open window detection, Presence sensor, ASC, Key lock

Conformity marking

CE

Battery

 2×1,5V, Type AAA

Size

52mm x 109mm x 22mm

Optional

Vertical wall support and table stand

Compatibility (*=optional)

– Dynamic Pro
– Smart Plus Program
– Musa Plus S
– Musa Pro
– Musa Home
– Synthesis
– Infinity*

OUR CONTROLS


Continue reading

INFINITY


Infinity is a chrono-thermostat for the control of electric radiators, the internal resistance of the radiator is controlled by a triac with PID control. This system allows for better regulation of the temperature thus always keeping the environment comfortable, thus leading to energy savings. All functions can be set remotely via Wi-Fi or radio. In addition to the basic functions of a chrono thermostat, the following functions are available: Open window detection that deactivates the radiator when the room window is opened thus avoiding wasting energy unnecessarily The child protection function that lowers the surface temperature of the radiator The Radar function that is activated if the room is empty, ECO mode which brings a reduction in consumption The ASC function that anticipates the time of switching on the thermostat so that the environment is at the desired temperature at the time set in one of the three programs of the Chrono mode.

Available versions:

INFINITY PLUS

In addition to the basic functions, this version is equipped with:

• Triac switching.
• LCD backlight.
• IR receiver (Works with Galaxy IR).

INFINITY WIFI

In addition to the basic functions, this version is equipped with:
• Wi-Fi (compatible with Domus One App).

• Compatible with Voice control (Alexa and Google Home).
• Triac switching.
• LCD backlight.
• Backlit button.

INFINITY ECO

Available functions:
1. Heating device with heat transfer to fluid.
2. The ambient temperature is controlled by an external sensor.
3. The symmetry of the object allows both right and left coupling of the towel warmer.
4. You can control the device through the Galaxy IR remote control which is equipped with an accessory that makes it anchorable to the wall or to the towel warmer.
5. The “ECO” function reduces the set temperature by 3° to reduce energy consumption.
6. The “Open window” function: The control is able to detect if a window has been opened by detecting a rapid drop in ambient temperature. If this happens, the radiator switches off for 30 minutes, after which the towel warmer will resume operation in the previously set state.
7. The “Key Lock” function: This feature allows the user to lock the keyboard so as to avoid accidental changes.
8. The “Adaptive Starting Control – ASC” function: This function will turn on the heating element earlier than planned (for up to 2 hours) to ensure that the room reaches the desired temperature at the set time. Note: The feature requires at least a couple of days of operation for maximum efficiency.
9. “Chrono” mode: This mode of operation allows the user to set a weekly repeating daily schedule.
10. “Fil-Pilot” mode: This is the mode in which the towel warmer is controlled from a remote-control panel. The operating mode will be selected by the Fil-Pilote control panel. The radiator thermostat also recognizes the most advanced six-order “Fil-Pilote” system that allows the use of the following functions:
◦ Standby: The thermostat remains on whilst the heating element is switched off.
◦ Comfort: The “Comfort” temperature is maintained as set by the user. ◦ Eco: The ambient temperature is maintained 3°C lower than the “Comfort” temperature.
◦ Anti-freeze: The ambient temperature is maintained at 7°C. ◦ Comfort-1: The ambient temperature is maintained 1°C lower than the ” Comfort” temperature.
◦ Comfort-2: The ambient temperature is maintained 2°C lower than “Comfort” temperature. NOTE: By activating this mode in versions without fil-pilots the thermostat works in Comfort mode. 11. The “Night” function: This mode keeps the temperature close to the temperature set by the user. Use this mode to heat the room to the desired temperature. Since the temperature of the NIGHT mode is always lower than the COMFORT temperature, it is recommended to use this mode to save energy at night or when the room remains empty for 2 hours or more. 12. The “2 Hour Timer” function: In this mode, maximum power is supplied to the heating element for 120 minutes regardless of the ambient temperature. After the time has elapsed, the thermostat will return to the previously set “stable” operating mode before entering 2-HOUR TIMER mode.
Note: A “stable” operating mode is a mode that has been operating for at least 5 seconds before switching to TIMER mode 2 HOURS 13. Anti-freeze: The temperature is prevented from falling below 7°C.
14. Behavioral indicator.
15. Relay switches.

TECHNICAL SPECIFICATIONS

Technical specifications
Operational modes

Comfort, Night, Fil-Pilote, Timer2h or Boost2h, Stand-by, Clock-thermostat, Antifreeze,
Open window detection, ECO, Presence Sensor, Children protection, ASC, Holiday, Key lock,
AndroidTM iOSTM Wi-FiTM compatible, Power indicator, Energy consumption indicator

Conformity marking

CE

Supply voltage

230 VAC – 50 Hz

Range of controllable powers

 Up to 2000 W

Ambient working temperature 10°C ÷ 32°C
Appliance classes

Class I 

IP code

IP24

Size

190mm x 83mm x 64mm

Available colours

White, Noir Sablè

TECHNICAL SPECIFICATIONS

OUR PRODUCTS


Continue reading

MUSA HOME


Musa is an intelligent digital electronic device, ideal for controlling the temperature of electric towel warmers. It can be used in combination with a wide range of heating elements that can be easily connected to the device and are available from many European third-party manufacturers. The 4-button on-board keypad allows the user to access a wide variety of functions, and the large round and backlit display constantly shows all the information related to the operation of the thermostat through pleasant icons.

Available functions: 1. The “Open window” function: The control is able to detect if a window has been opened by detecting a rapid drop in ambient temperature. If this happens, the radiator switches off for 30 minutes, after which the towel warmer will resume operation in the previously set state.

  1. The “Key Lock” function: This feature allows the user to lock the keyboard to prevent accidental changes.
  2. “Chrono” mode: This mode of operation allows the user to set a daily schedule to weekly repeat.
  3. “Fil-Pilot” mode: This is the mode in which the towel warmer is controlled from a remote control panel. The operating mode will be selected by the Fil-Pilote control panel. The device also recognizes the most advanced six-order “Fil-Pilote” system that allows the use of the following functions:

◦ Standby: The thermostat remains on whilst the heating element is turned off.

◦ Comfort: “Comfort” temperature is maintained, as set by the user.

◦ Eco: The ambient temperature is maintained 3.5°C lower than the “Comfort” temperature.

◦ Anti-freeze: The ambient temperature is maintained at 7°C.

◦ Comfort-1:  The ambient temperature is maintained 1°C lower than “Comfort” temperature.

◦ Comfort-2: The room temperature is maintained 2°C lower than “Comfort” temperature.

NOTE: By activating this mode in devices without fil-pilots the thermostat works in Comfort mode.

  1. The “Night” function: This mode keeps the temperature close to the temperature set by the user. Use this mode to heat the room to the desired temperature. Since the temperature of the NIGHT mode is always lower than the COMFORT temperature, it is recommended to use this mode to save energy during the night or when the room remains empty for 2 hours or more.
  2. The “2 Hour Timer” function: In this mode, maximum power is supplied to the heating element for 120 minutes regardless of the ambient temperature. After the time has elapsed, the thermostat will return to the previously set “stable” operating mode before entering 2-HOUR TIMER mode.

Note: A “stable” operating mode is a mode that has been operating for at least 5 seconds before switching to 2-hour TIMER mode.<

  1. Anti-freeze: prevents the temperature from falling below 7°C.
  2. Temperature offset: Since each room is different, the thermostat could potentially end up reaching a slightly different temperature than the one set, however, this can be easily solved through the use of this function. 
  3. Factory Reset: You can reset your device to factory default settings. Which resets the settings to those found when the device was first bought and taken out of its box. This procedure is recommended when you need to hand over the device to someone else. The person who receives it will have to reprogram all the settings from scratch. 
  4. Date and time adjustment.

TECHNICAL SPECIFICATIONS


Continue reading

DYNAMIC R


This digital programmable thermostat for electric radiators has the peculiarity of being able to rotate 350° around the resistance. It is equipped with a resistance with a particular coupling produced HT SpA on which it is mechanically fixed. The radiator thermostat allows for weekly programming with heat transfer to fluid as well as temperature control via a sensor placed in the room. The large backlit display extensively displays every status and mode of use that has been set on the device.

1. Heating device with fluid heat transfer 2. The ambient temperature is controlled by an external sensor 3. The symmetry of the object allows both the right and left coupling of the towel warmer 4. You can control the device through the Galaxy IR remote control which is equipped with an accessory that makes it anchorable to the wall or to the towel warmer

  1. The “ECO” function reduces the set temperature by 3° to reduce energy consumption
  2. The “Open window” function: The device is able to detect if a window has been opened by detecting a rapid drop in ambient temperature. If this happens, the radiator switches off for 30 minutes, after which the towel warmer will resume operation in the previously set state.
  3. The “Key Lock” function: This feature allows the user to lock the keyboard to prevent accidental changes.
  4. The “Adaptive Starting Control – ASC” function: This function will turn on the heating element earlier than planned (up to 2 hours earlier than set) to ensure that the room reaches the desired temperature at the set time. Note: The feature requires at least a couple of days of operation to achieve its maximum efficiency.
  5. “Chrono” mode: This mode of operation allows the user to set a daily schedule to weekly repeat, with 3 fixed programs and 1 programmable settable
  6. “Fil -Pilote” mode: This is the mode in which the towel warmer is controlled by a remote-control panel. The operating mode will be selected by the Fil-Pilote control centre. The device also recognizes the most advanced six-order “Fil-Pilote” system, which allows the use of the following functions:

◦ Standby: The thermostat remains on whilst the heating element is switched off.

◦ Comfort: The “Comfort” temperature is maintained as set by the user.

◦ Eco: The ambient temperature is maintained 3.5°C lower than the “Comfort” temperature.

◦ Anti-freeze: The ambient temperature is maintained at 7°C.

◦ Comfort-1: The ambient temperature is maintained 1°C lower than the ” Comfort” temperature.

◦ Comfort-2: The ambient temperature is maintained 2°C lower than “Comfort” temperature. 

NOTE: By activating this mode in devices without fil-pilots, the thermostat will work in Comfort mode.
11. The “Night” function: This mode keeps the temperature close to the temperature set by the user. Use this mode to heat the room to the desired temperature. Since the temperature of NIGHT mode is always lower than the COMFORT temperature, it is recommended to use this mode to save energy during the night or when the room is empty for 2 hours or more.

  1. The “2 Hour Timer” function: In this mode, maximum power is supplied to the heating element for 120 minutes regardless of the ambient temperature. After the time has elapsed, the thermostat will return to the previously set “stable” operating mode before entering TIMER 2 HOURS mode. 

Note: A “stable” operating mode is a mode that has been operating for at least 5 seconds before switching to TIMER mode 2 HOURS

  1. Anti-freeze: The ambient temperature is prevented from falling below 7°C.

TECHNICAL SPECIFICATIONS

Technical specifications
Conformity marking

CE

Supply voltage

230 VAC – 50 Hz

Range of supported powers

2000 W

Selectable temperature range 7°C ÷ 32°C
Appliance classes

Class I – Class II

IP code IP44
Size 113mm x 76mm x 42mm
Available colours White, Chrome
Optional Wi-Fi (with Voice Assistant) or remote control “Helios” or “Galaxy” models

OUR PRODUCTS


Continue reading

SYNTHESIS WIFI


In addition to the functions present on the SYNTHESIS, this version of the towel warmer thermostat features:

  • A programmable thermostat, which can be managed through the Wi-Fi. This function can be controlled via the Domus One App, available for any Android® or iOS® device, including weekly programming.
  • Compatible with Voice Assistant (Alexa and Google Home).

TECHNICAL SPECIFICATIONS

Technical specifications
Conformity marking

CE

Supply voltage

230 VAC – 50 Hz

Range of supported powers

2000 W

Selectable temperature range

7°C ÷ 32°C

Appliance classes Class I – Class II
IP code IP44
Size

113mm x 76mm x 42mm

Available colours White, Chrome

Continue reading

SLIM HOME


Chronothermostat connected via radio frequency with the TYDOM (DELTA DORE) system. It is equipped with a temperature probe through which the device can to operate the functions of interface (open window detection, weekly programming, ASC and more) on the radiator supported by display. In addition, when the control is set in “AUTO” mode, these functions can be selected from the App or from the remote control that communicates via radio frequency and that relies on the DELTA Dore environment. SLIM R is equipped with:

  • 16 A
  • RELAY
  • 2 TOUCH KEYS + ENCODER

NOTE: ADD DIMENSIONAL DRAWINGS

TECHNICAL SPECIFICATIONS

Technical specifications
Operational modes

Comfort, Night, Fil-Pilote, Timer2h or Boost2h, Stand-by, Clock-thermostat (9 programs),
Antifreeze, Open window detection, ASC, Continuous heating, Key lock

Conformity marking

CE

Supply voltage

230 VAC – 50 Hz

Powers

 up to 2000 W

Ambient working temperature 7°C ÷ 32°C
Appliance classes

Class I

IP code IP44
Size

 126,8mm x 29,2mm x 25mm

TECHNICAL SPECIFICATIONS

OUR PRODUCTS


Continue reading

ONE – RECEIVER


It is an advanced electronic programmable thermostat for electric towel warmers with heat transfer to fluid and temperature control via sensor in the environment. The system consists of two units: a fixed one for resistance control, and a remote control for the control of all functions. The fixed unit can be installed on the right or left of the towel warmer and communicates bidirectionally with your remote control. It is supplied pre-assembled to the heating element itself. The remote control has a backlit display for clear viewing, it is covered with a pleasant interchangeable silicone protective cover. The latter is available in seven different colors. The device allows for the selection of a weekly programming. The remote control can be hooked in a comfortable visual area to the elements of the towel warmer by means of a magnetic support, or positioned with a special wall fixing bracket. The system can be connected to Android® and iOS® devices with a special Domus One App.

 Functions: A single remote control can manage 8 different towel warmers.

  1. Heating device with heat transfer to fluid.
    2. The ambient temperature is controlled by an external sensor.
    3. The symmetry of the device allows for both right and left coupling of the towel warmer.
  2. The “ECO” function reduces the set temperature by 3° to reduce energy consumption. 
  3. The “Open window” function: The device is able to detect if a window has been opened by detecting a rapid drop in ambient temperature. If this happens, the radiator switches off for 30 minutes, after which the towel warmer will resume operation by reaching the previously set state.
  4. The “Key Lock” function: This feature allows the user to lock the keyboard to prevent accidental changes.
  5. The “Adaptive Starting Control – ASC” function: This function will turn on the heating element earlier than set (it can happen up to 2 hours earlier) to ensure that the room reaches the desired temperature at the set time. Note: The feature requires at least a couple of days of operation to achieve maximum efficiency. Note: The feature requires at least a couple of days of operation to reach maximum efficiency.
  6. “Chrono” mode: This mode of operation allows the user to set a daily schedule to repeat weekly. It has many options including 6 fixed programs and 3 settable programs.
  7. “Fil-Pilot” mode: This is the mode in which the towel warmer is controlled from a remote-control panel. The operating mode will be selected by the Fil-Pilote control panel. The appliance also recognizes the most advanced six-order “Fil-Pilote” system that allows the use of the following functions:

◦ Standby: The heating element is turned off whilst the thermostat remains on.

◦ Comfort: The “Comfort” temperature is maintained as it was set by the user.

◦ Eco: The ambient temperature is maintained at 3.5°C lower than the “Comfort” temperature.

◦ Anti-freeze: The ambient temperature is maintained at 7°C.

◦ Comfort-1: The ambient temperature is maintained at 1°C lower than the “Comfort” temperature.

◦ Comfort-2: The ambient temperature is maintained at 2°C lower than the “Comfort” temperature.

NOTE: By activating this mode in versions without fil-pilots, the thermostat works in Comfort mode.

10. The “Night” function: This mode keeps the temperature close to the temperature set by the user. Use this mode to heat the room to the desired temperature. Since the temperature of the NIGHT mode is always lower than the COMFORT temperature, it is recommended to use this mode to save energy during the night or when the room remains empty for 2 hours or more.11. The “2 Hour Timer” function: In this mode, maximum power is supplied to the heating element for 120 minutes regardless of the ambient temperature. After the time has elapsed, the thermostat will return to the previously set “stable” operating mode before entering 2-HOUR TIMER mode.
Note: A “stable” operating mode is a mode that has been operating for at least 5 seconds before switching to 2-HOUR TIMER mode

TECHNICAL SPECIFICATIONS

Technical specifications
Conformity marking

CE

Supply voltage

230 VAC – 50 Hz

Range of supported powers

100 ÷ 1000 W

Selectable temperature range

7°C ÷ 32°C ± 10%

Maximum thermal fuse temperature 152°C
Appliance classes Class I – Class II
IP code IP44
Size 56mm x 56mm x 44mm
Available colours White, Chrome

Continue reading


Address

Via Pacinotti, 26/28, 35030 Rubano PD

© Selmo. All rights reserved.